How to wire the led sensor light

Posted by: enthusiast  • Information section:Home appliance

 LED sensor light overview

  LED sensor light is a new type of intelligent lighting product that automatically controls the light source through the sensor module. From the light source material, LED as an intermittent illumination source for frequent switching , is undoubtedly the most ideal choice for incandescent lamps and various types of fluorescent lamps. It has long switching life, fast response, high luminous efficiency, small size and easy control. The characteristics are perfectly reflected. On the other hand, it is smarter and does not require a manual switch to automatically light up the bulb

  Depending induction, LED induction lamp there are four categories: 1, LED lights sound and light control sensor; 2, LED infrared line sense light; 3, a radar sensor lights;. Among them, LED infrared sensor lamps are widely recognized by the public for their high efficiency, energy saving, high sensitivity and long service life.

  With the delisting of incandescent lamps, it is expected that in the near future, public areas such as community corridors and underground garages will be completely replaced by LED sensor lights.

  Led induction lamp works

  In the effective sensing range, if someone and an object (such as a car) move, or there is a sound (screaming, high-figure, impact, etc.), the light source automatically lights up; the effective movement/sound is extinguished after about 1 to 2 minutes. With the light control circuit can be made into a night type (only when the environment is dim), or day and night (automatically lit during the day and night);

  In terms of the working principle of the sensor , there are mainly three kinds of voice control, human body infrared and microwave radar;

  There are separate and integrated types ( sensors and light sources) in terms of product structure ;

  In terms of product shape or installation method, there are screw bulbs, lamps, ceiling lamps, downlights, ceiling lamps, and the like.

  The application of LED light source in induction lamp products has the advantages (long switch life, high light efficiency, small size and easy control), avoiding the shortcomings (no light temperature caused by continuous high temperature, low color rendering is not a problem) ). The benefits of power saving can quickly recover early high investment, and long life saves a lot of labor costs. At the same time, automatic switch brings great convenience to people's life, it is worth promoting.

 

  Led body sensor light wiring method

  1. Confirm the voltage. Turn off the power before installation. The power cable is connected to 220VC, 50 (HZ), and the 4×25 large flat head self-tapping screws are fixed on the top of the ceiling or the wall through the chassis (it needs to be fixed firmly and safely).

  2. Wiring (Connect one of the wires of the lamp body with the wire and the wire, and the other with the zero wire. After connecting, pull the wire firmly), no matter what. Install the bulb, glass or back cover. You can power it up for trial. When the product is powered on for the first time, there will be three consecutive lights, which means normal, but it will not be lit normally during the day or when the light is strong. When the light is dark at night, the person will automatically light up when it is dark. For example, during the day, cover the infrared probe lens with a black cloth. After ten seconds (not allowing it to transmit light), try to light it.

  3. Divide the bulb into two groups, screw all the wires of all the bulbs together and connect them to the black line, then screw the other wires of each group to the powder line and the red line.

  4. The yellow-green wire is connected to the metal casing part of the lamp. LED lights are not controlled by electronic switch grouping. The switch is turned on once to light a group of lights, two times to open a group, and three times to light up.



Tagged:

read ()  •  Sep 18, 2019  •  Edit


YOU MAY ALSO LIKE:

12v led circuit diagram-HV9910 circuit

Date: Sep 21, 2019  | Click 3 times

image

12v led circuit diagram
The LED driver module uses the HV991

benefits of led lighting

Date: Sep 21, 2019  | Click 6 times

image

benefits of led lighting
In the past two years, LED-related

12V LED driver circuit

Date: Sep 20, 2019  | Click 1 times

image

12V LED driver circuit

The buck/boost converter must be use

LED driver application and driving method

Date: Sep 20, 2019  | Click 1 times

image

At present, LED is developing rapidly, technology is becomin

What is a wireless LED control card

Date: Sep 20, 2019  | Click 10 times

image

What is a wireless LED control card
The wireless LED control

LED series and parallel drive circuit characteristics

Date: Sep 19, 2019  | Click 23 times

image

LED series and parallel drive circuit characteristics 1. LED

What is the cause of the LED flashing?

Date: Sep 19, 2019  | Click 10 times

image

The use of LEDs is the choice of every household. However, s

Making 8×10 LED matrix with Arduino

Date: Sep 19, 2019  | Click 11 times

image

The LED matrix is some of the most popular projects built us

image

LED lighting has many advantages over traditional incandesce

Positive and negative judgment method of led lamp

Date: Sep 18, 2019  | Click 20 times

image

The principle of LED lights  LEDs are light-emitting diode

image

Is the led fluorescent lamp UV?  Fluorescent lamps are exc

image

Electronically controlled engine working principle  The bi

image

USB charger kit, also known as MP3/MP4 charger, input AC160-

12V High Efficiency White Light LED Driver

Date: Jun 28, 2019  | Click 22 times

image

12V High Efficiency White Light LED Driver







The memory is organized a paper detailed 51 MCU

Date: Mar 11, 2019  | Click 55 times

image

Program memory:The procedures used to store (binary image fi

Uled TV and Quantum Dot TV which is better

Date: Jan 06, 2019  | Click 44 times

image

Uled TV.ULED TV is to enhance the effect of television to op

Basic knowledge of inverter power supply design

Date: Nov 30, 2018  | Click 31 times

image

The power supply, as commonly understood, is a conversion de

copyright

© 2018-2019 www.loveelectronics.net Corp.All Rights Reserved.