benefits of led lighting

Posted by: admin  • Information section:LED

benefits of LED lighting


In the past two years, LED-related products have become more and more popular, and all the old-fashioned manufacturers have also launched their own LED products, including many brands such as Delixi, Chint, NVC, Philips, etc. The products launched are even more varied. LED bulbs, LED energy-saving lamps, LED ceiling lamps, LED kitchen lamps, LED ceiling lamps, LEDT5 lamps, LED lamps and other LED products, the market competition is also unprecedentedly fierce, then what are the benefits of LED bulbs?

Philips ceiling light

1, energy saving



The biggest advantage of LED is energy saving. The average lamp power ranges from 20W to 100W, while the energy saving lamp power ranges from 5W to 65W. The bulb uses LED as the light source, and the power of only 0.8W-12W can replace the ordinary bulb of 15W-100W and the energy-saving lamp of 5W-50W. It can be seen that the power ratio of LED bulbs to ordinary bulbs and energy-saving lamps can reach 1:10.


Ordinary bulbs and energy-saving lamps are used at very high temperatures (80-120 ° C), and the spectrum of the energy-saving lamps contains IR (infrared). The content of ordinary bulbs is higher, and the temperature of a large number of used environments will increase significantly. In the summer, the workload and time of the refrigeration equipment are obviously increased, and the final result is an increase in power consumption.


The bulb uses LED as the light source, and the LED emits no IR (infrared) component in the spectrum, and the overall structure adopts a professionally designed heat dissipation structure. The temperature during normal operation is only 40-60 ° C, even if it is used in large quantities. It is much lower than the temperature generated by the sound bulb and the energy-saving lamp. For example, in the summer, the weight and time of the refrigeration equipment are significantly reduced. Combined with the difference in power (1:10), the result is power consumption. The relative reduction saves money and ultimately reflects the energy saving of the bulb.
 

 

Philips bulb

2, short response time



The general energy-saving lamps will change due to changes in the ambient temperature. The normal operating temperature is between 20 and 40 degrees. It takes 5 to 6 minutes to reach a stable brightness in winter (at low temperatures). All lamps work normally in a cold environment than in a warm environment, and the light is dim or accompanied by flickering. Only when the temperature rises, the brightness will gradually become normal at -35 ° C - 80 °. C, so generally do not consider its working environment temperature.
 

3, convenience



Can directly replace the existing Tongxiang E27, E14, GU10 and B22 interface energy-saving lamps and ordinary bulb products, without any changes, without the need for any technicians or professionals, read our instructions carefully, DIY can be easily Realize the replacement from ordinary lighting to LED lighting.
 

4, long life



The life of ordinary bulbs and energy-saving lamps is 1000 hours and 8000 hours (calculated for 4 hours per day); LED bulb source life is 50,000 hours (calculated 24 hours a day)
 

5, health



Ordinary and energy-saving lamps contain IR (infrared) and UV (ultraviolet) radiation due to the spectrum at work, which can have a certain degree of health impact in some applications, such as:


5.1. IR radiation will shorten the preservation time of food (especially meat, sushi, etc.), thus affecting its nutritional value.

5.2. UV radiation, long-term exposure to the light source containing its components, the color of the items illuminated by it will turn white, like clothes, pearls, watches, watches, crafts, paintings, etc.


Bulbs have no IR (infrared) and UV (ultraviolet) radiation due to the spectrum at work, and have no adverse effects on health when used.
 

6, environmental protection



Ordinary bulbs and energy-saving lamps generate a large amount of IR (infrared) and UV (ultraviolet) radiation during operation. Moreover, the inside of the bulb is filled with an inert gas, and there are pumps and other harmful gases and substances in the production process and after the use of waste, and the pulverizing damage will also have a certain impact on the environment.


The bulb uses LED as the light source, and the LED works without IR (infrared) and UV (ultraviolet) radiation. The LED light source used does not have any filling gas, and there is no pulverizing damage, which will not cause adverse effects on the environment. Influence. This reflects its environmental side.
 

7, security



The temperature of ordinary energy-saving lamps will be around 60-80 °C, and the temperature of ordinary incandescent lamps will be higher (80-120 °C). If you accidentally touch it, it will burn.


The bulb uses LED as the light source, with a professional heat dissipation structure, the working temperature is very low (40-60 ° C), and it will not burn on the hand.


The material used for energy-saving lamps and ordinary bulb products is glass, which is easily broken by collision with hard objects, causing permanent damage and cannot be used, and will be cut by glass if careless.


The bulb is made of professionally designed enamel, the enamel material is made of PC material/acrylic die-casting, and the LED of the light source part is also made of special material for earthquake resistance (the lens part is the most advanced one-time molding). Soft lens technology), and its lampshade is made of acrylic material, which is not easy to cause cuts even if it is broken.



Tagged:

read ()  •  Sep 21, 2019  •  Edit


YOU MAY ALSO LIKE:

12v led circuit diagram-HV9910 circuit

Date: Sep 21, 2019  | Click 3 times

image

12v led circuit diagram
The LED driver module uses the HV991

12V LED driver circuit

Date: Sep 20, 2019  | Click 1 times

image

12V LED driver circuit

The buck/boost converter must be use

LED driver application and driving method

Date: Sep 20, 2019  | Click 1 times

image

At present, LED is developing rapidly, technology is becomin

What is a wireless LED control card

Date: Sep 20, 2019  | Click 10 times

image

What is a wireless LED control card
The wireless LED control

LED series and parallel drive circuit characteristics

Date: Sep 19, 2019  | Click 23 times

image

LED series and parallel drive circuit characteristics 1. LED

What is the cause of the LED flashing?

Date: Sep 19, 2019  | Click 10 times

image

The use of LEDs is the choice of every household. However, s

Making 8×10 LED matrix with Arduino

Date: Sep 19, 2019  | Click 11 times

image

The LED matrix is some of the most popular projects built us

image

LED lighting has many advantages over traditional incandesce

Positive and negative judgment method of led lamp

Date: Sep 18, 2019  | Click 20 times

image

The principle of LED lights  LEDs are light-emitting diode

image

Is the led fluorescent lamp UV?  Fluorescent lamps are exc

How to wire the led sensor light

Date: Sep 18, 2019  | Click 21 times

image

 LED sensor light overview  LED sensor light is a new typ

image

Electronically controlled engine working principle  The bi

image

USB charger kit, also known as MP3/MP4 charger, input AC160-

12V High Efficiency White Light LED Driver

Date: Jun 28, 2019  | Click 22 times

image

12V High Efficiency White Light LED Driver







Incandescent lighting control switch circuit

Date: Jun 15, 2019  | Click 11 times

image

Under normal conditions, the alternating current forms a loo

The memory is organized a paper detailed 51 MCU

Date: Mar 11, 2019  | Click 55 times

image

Program memory:The procedures used to store (binary image fi

Uled TV and Quantum Dot TV which is better

Date: Jan 06, 2019  | Click 44 times

image

Uled TV.ULED TV is to enhance the effect of television to op

Basic knowledge of inverter power supply design

Date: Nov 30, 2018  | Click 31 times

image

The power supply, as commonly understood, is a conversion de

copyright

© 2018-2019 www.loveelectronics.net Corp.All Rights Reserved.