Pulse solenoid valve wiring diagram

Posted by: admin  • Information section:Foreign map

1, pulse electromagnetic valve and a grounding line, a control line, a common line.

脉冲电磁阀接线图

2, grounding wire can not meet, in order to control line connected to the pulse controller, a pulse electromagnetic valve in series with the common line to enter the pulse control device of common terminal.

脉冲电磁阀接线图

Pulse electromagnetic valve is one of the common parts of bag filter, the electromagnetic valve comprises a shell, a diaphragm, an electromagnetic coil etc.. The diaphragm is the function of the electromagnetic pulse valve is divided into before and after the two chambers, when connected to compressed air through the orifice into the chamber after, when the pressure chamber after the diaphragm close to the valve outlet, the electromagnetic pulse valve in the "off" state. Pulse jet control device of electrical signals, the electromagnetic coil, the diaphragm opens when the electromagnetic valve is in the open state: electromagnetic pulse valve armature reset, after the chamber put stomatal closure, after the chamber pressure increases the diaphragm close to the valve outlet, electromagnetic pulse valve is in the "off" state.

Check whether the electromagnetic pulse valve is damaged during transportation before use. The first ventilation cleaning gas supply pipe should be instalLED in the front. Please pay attention to the direction of gas flow and nozzle is correct. In the installation of all the O type sealing ring must be coated with a suitable lubricant.

The electromagnetic pulse has three pin valve coil, and equipped with a special plug, each plug on a terminal, one of the symbol "" for the grounding pin, the user may need to decide whether to ground. (in general, the voltage is less than 36V can be grounded, more than 36V when it should be grounded.) The other two for the coil power supply pins are respectively connected with the pulse jet control device corresponds to the common end and the serial number of each end of the electromagnetic valve must have a terminal and a common terminal pulse controller connected to another terminal and control instrument serial number is connected, the electromagnetic valve is connected with a No. No. two port, the electromagnetic valve is connected with the two port and so on. Note that the controller output voltage to the solenoid valve coil and work voltage. Pulse bag filter tank (including nozzle) set by the user, the gas tank capacity should meet with the electromagnetic pulse valve the working stability of the gas source, gas tank wall should be clean and free of rust. The gas tank leak, and comply with the relevant safety requirements.



Tagged:

read ()  •  Jan 09, 2019  •  Edit


YOU MAY ALSO LIKE:

image

Manufacture of Electronic Fishing Device Working principle The fishing device is based on the principle that the electric energy with a voltage higher than 100

image

12V High Efficiency White Light LED Driver

image

The working principle is that the integrated circuit TDA2822M is an eight-foot double-in-line package. If it can not be replaced by TDA2822, the package of TDA2

image

What are the common PCB layout software?1. Cadence Allegro The Cadence Allegro System Interconnect Platform enables high-performance interconnects to be designe

image

The difference between pcba and pcb The translation of the PCB into Chinese is called a printed circuit board. Since it is made by electronic printing, it is

image

A relay is an electronic control device that has a control system (also called an input loop) and a controlled system (also called an output loop). It is usuall

image

The working principle of leakage circuit breaker Keywords: leakage circuit breaker, working principle In order to know the working principle of the leakage c

image

When making circuit production, the circuit board is indispensable, but you can't buy it, so I fumbled for a month or so and finally made it. With this step

image

The working principle of the thermal relay is that the current flowing into the heating element generates heat, and the bimetal having different expansion coeff

image

gas range solenoid valve detection method Keywords: gas stove, solenoid valve, self-priming valve, detection Working principle of gas stove solenoid valve: W

copyright

© 2018-2019 www.loveelectronics.net Corp.All Rights Reserved.